3/8" SK78 Pure Dyneema Suck Down Winch Line
Eye Buffer Sleeve Color Options: Red, Blue, Black, Yellow, Orange, Green.
Made In the USA.
Drum Connection: Taper, Tape and Burn
Available Rope Size: 3/8" x 12FT and 5/16" x 12FT
Breaking Strength: 19,690 LBS
Made in the USA, and hand spliced in house.
3/8" Suck Down Winch Line Dyneema SK78
Our 3/8" winch lines are made from pure Dyneema SK78 fiber manufactured by DSM in the Netherlands and then stranded into our high quailty rope here in the USA. All of our winch lines are built and hand spliced using a double locking splice here in Cedar City, Utah. Being we manufacture our own lines in house, we control the quailty of each winch line manufactured to ensure a top quailty product. Our winch lines are a great replacement for the traditional steel wire rope winch lines that come standard on most of today's winches. We use only a very heavy pattern black guesst tube thimble made in the USA on all of our winch lines. Our protective sleeve material is made in USA using mil-spec material. Even though our sleeves are tight to the rope they still slide up or down the rope so they can be used or positioned in hazardous areas. Our winch lines come standard with a bolt through style lug for easy connection to your drum unless a different style connection is required, if this is the case please just let us know when you place your order as the cost will remain the same. High quality American made Synthetic winch lines are the way to go. They are much stronger and lighter than traditional steel lines and safer to use. No more wire splinters or broken strands to cut your hands on. Easy to free spool and easier to wind in. Our winch lines can be cleaned with warm water and set out to dry.
Our winch lines are easy to clean. DO NOT USE ANY WASHING DETERGENT/SOAP
- Sit out to dry. Or simply hose off with garden hose. WE DO NOT
RECOMMEND CLEANING USING A PRESSURE WASHER
DO NOT USE ON SHARP CORNERS OR ON ANY PART OF THE VEHICLE THAT HAS SHARP CORNERS OR BURRS AS PRODUCT DAMAGE MAY OCCUR.